Candidates are advised to follow the below requirement for a seamless experience during the assessment. 


  • Internet Explorer version 9 and above.
  • Latest version of Java.
  • Only one version of Java installed.


There are three ways to start  an assessment on Mettl Platform.

 

  • In case the candidate has received an Email with the test notification,

1.  Click on the 'CHECK SYSTEM COMPATIBILITY' tab to be redirected to a system check link.



WP_Email.png



2.   If System compatibility check, Mettl's diagnostic run will automatically try to download the necessary JAVA applets and will run a         complete system diagnostics check with reference to the test platform. 

      Candidates are requested to follow all the steps as guided by the system. 

      The whole process takes around 2-5 minutes. 

      Screenshots of all the steps are shown below for reference.


  • Provide permission for JAVA applet to start downloading. Thereafter proceed by clicking on 'Next'.

WP_SystemCheck.png


  • Once the JAVA applet download is complete, a dialogue box is opened. Candidates are required to click on 'Run'.

WP_SystemCheck_2.png


  • Upon Successful completion of the system check, the following message will be displayed.

WP_SystemCheck_3.png



If system check is successful, click  the ‘START TEST’ tab in the notification email to get redirected to the test page.

 

Refer to steps (3 - 9) below for further help.

 





  • If the candidate has received a test link URL, copy and paste the URL in the address of the browser.

testlink.png


Candidates can open the test window by clicking on the 'Launch Test' tab.

 

Refer to steps (3 - 9) below for further help.

 

  • If the candidate has received an invitation key.
1.   In the address bar, candidates need to type 'tests.mettl.com' 

invitationkey.png



2.  Upon entering the 'Test Invitation Key', candidates can launch the test window by clicking on 'Go' or by pressing 'Enter'.
Refer to steps (3 - 9) below for further help.



Following steps (3 - 9) are generic and to be followed once the test launches.


3.  Mettl's diagnostic run will automatically try to download the necessary JAVA applets and will run a complete system diagnostics check with reference to the test platform. 

Candidates are requested to follow all the steps as guided by the system. 

The whole process takes about 2-5 minutes. 

Screenshots of all the steps are shown below for reference.

 

 

  • Provide permission for JAVA applet to start downloading. Thereafter proceed by clicking on 'Next'.


WP_SystemCheck.png


 

  • Once the JAVA applet download is complete, a dialogue box is opened. Candidates are required to click on 'Run'.


WP_SystemCheck_2.png


 

  • Upon Successful completion of the system check, candidates are required to click on 'Next'.

WP_test%20loading.png


4.   Once the candidate clicks on the ‘Next’ button, he/she will be directed to an instructions page. 

      The candidate is supposed to read carefully and adhere to all the instructions provided, till the completion of the test. Candidates need to click on ‘Proceed’ button in order to be directed to the registration page.




5.   Candidates are required to fill in all the relevant data and proceed by clicking on ‘Next’.




WP_crf.png



6. Candidates are required to provide their snapshot.


WP_snapshot.png


7. Once the candidate has taken and submitted their snapshot, they have to take a snapshot of a valid ID card. (Candidates are to ensure that, all the details in ID card are clearly visible and legible).


8.  After registering, and submitting both the snapshots, candidates are guided to a ‘Section Instructions Page’. 

     Upon reading all the instructions carefully, candidates may start the test by clicking on ‘Start Test’ tab.



 

9.  Once a candidate clicks on ‘Start Test’ it will open up the main test window. The screen has following data.

  • Time remaining for the test, displayed on top right corner of the test window.
  • 'Next Question' tab on the bottom right corner of the test window. Candidates can navigate between questions by clicking on the respective question number as well.
  • 'Section #1’, by using the option provided candidates can navigate between sections, or by clicking on the 'Next Section' tab on the bottom right of the test window.
  • 'Finish Test' tab on the top right corner of the test window.
  • The Revisit option helps the candidate mark a question that can be reviewed later before finishing the test.
  • The status of the question can be known according to the colour displayed. Green colour is for the question attempted , Orange for the questions to be reviewed and Grey for the questions not attempted.




  


 

10.   Once a candidate decides to submit the test, he/she can do so by clicking on the ‘Finish Test’ tab at the top right corner of the screen. After clicking on ‘Finish Test’, candidates are guided to a ‘Test Summary’ page. Candidates are supposed to review all the details and either go back by clicking on ‘Cancel’ or proceed to  submit by clicking on ‘Yes, Finish Test’.


finish%20test.png


 

11.  On completion of the test, candidates are requested to provide a feedback regarding their test taking experience.


feedback.png



For further query, or in case of any technical difficulty while attempting the test, candidates are requested to:

 

  1.  Call on Mettl's technical support desk. Ph: +91 8287 803040
  2.  Drop an email at  support@mettl.com